Epson EpsonNet C82391 Series Administrator's Manual page 46

6. If you want to acquire a private address between 169.254.1.1
and 169.254.254.254 automatically when an IP address cannot
be acquired by the DHCP server, select Enable for Use a
private IP address when an IP address cannot be
assigned by the DHCP server.
7. When setting the IP address using the ping command, select
Manual and ON for Set by PING to set the IP address with
the arp/ping commands. Select OFF when setting the IP
address with EpsonNet WinAssist/MacAssist/WebAssist;
this prevents any unexpected change of the IP address.
Note:
Be sure to select OFF when not using ping; this prevents an
unexpected change of the IP address by EpsonNet WebManager.
8. Select Enable or Disable for Universal Plug and Play. Select
Enable if you want to use the Universal Plug and Play
function in Windows Me or future operating systems.
9. Change the default Universal Plug and Play device name, if
desired. This device name is used for Windows that supports
the Universal Plug and Play function.
10. Click SUBMIT and enter the password to update the settings.
The same password is required for EpsonNet WinAssist,
MacAssist, and WebAssist. See "Password" on page 10-31 for
more information on setting the password.
11. If the message "Configuration change is complete!" appears
on your screen, the update is complete. Do not exit the Web
browser and do not send a job to the printer until this message
appears. Follow the on-screen instructions to reset the printer.
Note:
Since the new IP address becomes available after resetting the printer,
you need to restart EpsonNet WebAssist by entering the new IP address.
3-12
Setting the IP Address