Setting Up For Ibm Aix 3.2.5 Or Later And 4.1.3 Or Later - Epson EpsonNet C82391 Series Administrator's Manual

Setting up for IBM AIX 3.2.5 or later and 4.1.3 or later

In the following steps, substitute the name that your printer with
the interface card will be known by for HOSTNAME, and the
name by which you want your printer to be known for Rprinter.
1. Add the IP address and printer host name to the /etc/hosts
file.
For example:
22.33.44.55 HOSTNAME
2. Run smit.
For example:
smit printer
3. Set the printer name (for example: Rprinter) in:
"Manage Remote Printer"
"Client Services"
"Remote Printer Queues"
"NAME of queue to add".
Set the host name (for example: HOSTNAME) in:
"DESTINATION HOST for remote jobs".
Set the port name (for example: aux) in:
"Name of QUEUE on remote printer".
4. To print, use the lpr command.
For example:
lpr -PRPrinter Print-File-Name
Settings for UNIX
9
9-5