Chapter 4
Settings for NetWare
This chapter explains how to configure the interface card for
NetWare. First, you need to set up the printer in a NetWare
environment, and then configure the interface card using
EpsonNet WinAssist.
Overview
Supported systems
Server environment
NetWare 3.1/3.11/3.12 (Bindery)
NetWare 4.1/4.11 (NDS, Bindery emulation)
IntranetWare (NDS, Bindery emulation)
NetWare 5/5.1 (NDS, Queue-based system, Novell NDPS
Gateway 2.0)
Client environment
The client environment must be supported by NetWare.
The clients are able to use the printer driver mounted on the
interface card.
Settings for NetWare
4
®
4-1