Setting Menus - Epson EpsonNet C82391 Series Administrator's Manual

Launch Browser button:
Select the printer you want to configure, and then click the
Launch Browser button. EpsonNet WebAssist will start to
configure the interface card. EpsonNet MacAssist
automatically closes when the browser launches.
Configuration button:
Select the printer you want to configure, and click this button
to configure the interface card using EpsonNet MacAssist.
Quit button:
Exits EpsonNet MacAssist.

Setting menus

About passwords
The password is required to configure a interface card. When you
click OK in the setting dialog box or click Return to default, the
Password dialog box appears.
1. To set the password or to change the current password, click
Change.
2. In the Administrator password dialog box, enter a password
(up to 20 characters) and click OK. Passwords are case
sensitive.
Note:
The password is used for EpsonNet WinAssist, MacAssist, and
WebAssist.
Since the new password becomes effective after sending the data
to the interface card, enter the old password immediately after
changing the password.
If you forget your password, you need to initialize the interface
card. See "Initializing the Interface Card" on page 1-6 for
instructions.
The EpsonNet Configuration Utility
10
10-19