Connect The Ub-R03 To The Tm Printer - Epson C32C824461 - UB R03 Print Server Technical Reference Manual

Technical reference
Table of Contents

Advertisement

Connect the UB-R03 to the TM Printer

1
Confirm items in the pack.
2
Remove the two screws of the universal interface connector of the TM
Printer and connect the UB-R03, and fix it with two screws.
Two fixing screws
3
Set the DIP switch of the TM Printer. The interface of the TM printer must
be selected as "parallel" with the appropriate settings. If a TM printer
that can set the reset signal for pin 31 is used, set to "enable." Refer to
the Technical Reference Guide for each TM printer for these settings for
details. Also, set the memory switches according to your needs.
24
("Unpacking" on page
20)
Connector to the TM Printer

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ub r03

Table of Contents