Table of Contents
Advertisement
Status lights
The interface card has two status lights that indicate the current
operating status of the interface card when you first turn on the
printer, during normal operation, and when errors occur. The
Status light has two colors, red and green, and when both colors
are on it appears orange. The Data light is a green light.
The status lights indicate the following:
Status light
Green
Green
Orange
Orange
Red
Red Flashing
Red and Green flashing alternately
Status sheet button
The first time you use the interface card after installing or
reinstalling it, turn on the printer while holding down the status
sheet button. Hold down the button for about twenty seconds to
initialize the interface card. The length of time necessary to hold
down the status sheet button varies depending on the printer
model. See your user's guide for more information.
Before you start configuring the interface card, be sure to press
and hold the status sheet button on the interface card to print a
status sheet. A status sheet shows important information such as
the current configuration, the serial number, and the MAC
address. You will need this information to configure the interface
card.
1-2
Getting Started
Data light
On
Flashing
On
Flashing
On
On
Status
10M link
10M receiving packets
100M link
100M receiving packets
Initializing
Error status
Firmware update mode
Advertisement
Table of Contents
