Configuring for AppleTalk Using EpsonNet WinAssist
If you want to configure the interface card using EpsonNet
WinAssist from a Windows environment, follow the steps below.
Note:
Before following the steps below, you must have set the IP address for
the interface card or logged in to the NetWare server's NDS context as
ADMIN.
1. Turn on the printer with the interface card.
2. Start EpsonNet WinAssist.
Windows Me/98/95/2000/NT 4.0: Click Start, point to
Programs, EpsonNet WinAssist, then click EpsonNet
WinAssist.
Windows NT 3.51: Double-click the EpsonNet WinAssist icon
in the EpsonNet WinAssist group.
Settings for Macintosh
7
7-5