Setting Up For Sunos 4.1.4 Or Later - Epson EpsonNet C82391 Series Administrator's Manual

Setting up for SunOS 4.1.4 or later

In the following steps, substitute the name that your printer with
the interface card will be known by for HOSTNAME, and the
name by which you want your printer to be known for Rprinter.
1. Add the IP address and printer host name to the \etc\hosts
file.
For example:
22.33.44.55 HOSTNAME
2. Create a spool directory.
For example:
mkdir\var\spool\lpd\PRIFx
3. Add the printer entry to the \etc\printcap file.
For example:
Rprinter |
SC860:lp=:rm=HOSTNAME:rp=aux:sd=/var/spool/lpd/
PRIFx
4. To print, use the lpr command.
For example:
lpt -s -PRPrinter Print-File-Name
c
Caution:
Files that exceed 1MB may not be printed unless the -s option is
used.
9-4
Settings for UNIX