Setting Up Your Printer Using Epsonnet Direct Print - Epson C823781 - Net Print Server Administrator's Manual

Your computer is now set up to print with LPR via EpsonNet
Direct Print. See the next section to set up your printer.
Setting Up Your Printer Using EpsonNet Direct
Print
When setting up a printer to print with LPR, you can add both a
printer located in the same segment and one located beyond a
router.
Note:
❏ Be sure that the computer is connected to the network and TCP/IP
is correctly set.
❏ A valid IP address must be set; otherwise the printer does not appear
under the Epson_lpr group icon.
❏ The EPSON Status Monitor 2 utility shipped with the interface card
models C82362✽/C82363✽/C82364✽ with software version 1.x
and EPL-N2700/N4000 printers enables EPSON TCP/IP printers.
These EPSON TCP/IP printers can coexist with lpr printers added
by EpsonNet Direct Print.
❏ Job control functions such as Cancel Printing and Purge Print
Jobs are available when you double-click the target printer icon in
the Printers folder. However, if the printer has already started
printing a document, the print job may not be cancelled completely.
EpsonNet Direct Print
8
8
8
8
8
8
8
8
8
8
8
8
173