Epson EpsonNet C82391 Series Administrator's Manual page 38

5. Click the TCP/IP tab to display the TCP/IP menu.
Note:
The network administrator must confirm any changes made to the
IP address settings.
6. Select the "Get IP address" method. When you select Auto,
DHCP becomes available and assigns an IP address
automatically. If you want to set the IP address manually,
select Manual.
Note:
The default is Auto. When Auto is selected, DHCP becomes
available. To use the DHCP server, it must be installed on your
computer and correctly configured. See your operating system's
online help for detailed instructions.
If Auto is selected and Use a private IP address when an
IP address cannot be assigned by the DHCP server
check box is disabled, the interface card uses "192.168.192.168"
as the default IP address.
3-4
Setting the IP Address