Installing The Internet Printing Protocol Client; Connecting To The Printer From The Add Printer; Wizard - Epson EpsonNet C82391 Series Administrator's Manual

4. Click SUBMIT and enter the password to update the settings.
The same password is required for EpsonNet WinAssist,
MacAssist, and WebAssist. See "Password" on page 10-31 for
information on setting the password.
5. If the message "Configuration change is complete!" appears
on your screen, the update is complete. Do not exit the Web
browser and do not send a job to the printer until this message
appears. Then, follow the on-screen instructions to reset the
printer.

Installing the Internet Printing Protocol client

The IPP client must be installed in your computer. Follow the
steps below to install the IPP client.
1. Insert the Windows Me CD-ROM.
2. Select the add-ons folder, then the IPP folder.
3. Double-click wpnpins.exe. Then follow the on-screen
instructions.
4. Click OK to restart your computer.
Connecting to the printer from the Add Printer wizard
You can connect to a printer through IPP.
1. Click Start, point to Settings, and then click Printers.
2. Click Add Printer, and then click Next.
3. Click Network Printer, and then click Next.
4. Type the URL of the printer, and then click Next.
Format:
http://IP address of the interface card:631/the printer name
5-14
Settings for Windows Me/98/95