5
5-14 Setting up Network Servers
T
F
W
O ACCESS THE
IERY
EB
1. Start the Internet browser.
2. Enter the IP address or DNS name of the RIP Station.
3. Press Enter.
The RIP Station home page appears. Click the name of a particular WebTool to use it.
4. Use the Configure button to enable only certain WebTools for users.
Setting the WebLink destination
The pre-set WebLink destination can be changed; this function requires the
Administrator password, if one has been set.
T
W
L
O CHANGE THE
EB
INK DESTINATION
1. Start your Internet browser application.
2. Enter the IP address or the DNS name of the RIP Station.
The RIP Station home page appears.
3. Press the Control key (Mac OS) or Ctrl key (Windows) while you click the WebLink
button.
4. Enter the Administrator password (if required) and click OK.
The Update WebLink dialog box appears.
5. Enter the new WebLink address (URL) and click OK.
T
:
OOLS
: