•
SVS
The applicable storage systems require a dual controller configuration. If you
use the system in a hub-connected environment, you must set unique loop
IDs for all connected hosts and storage systems.
For details about microprograms, see the HDLM Release Notes.
HBA
For applicable HBAs, see the HDLM Release Notes.
When Handling Intermediate Volumes Managed by Hitachi RapidXchange
The HDLM-related programs that are required when you convert data with
intermediate volumes managed by Hitachi RapidXchange are listed in
3-2 HDLM-Related Programs Required When Handling Intermediate Volumes
Managed by Hitachi RapidXchange on page
RapidXchange, see the Reference Manual / File Conversion Utility & File
Access Library.
Table 3-2 HDLM-Related Programs Required When Handling Intermediate
AIX 5L V5.3
Cluster Software Supported by HDLM
The HDLM-related programs required when you combine cluster
configurations are listed in
Combining Cluster Configurations on page
AIX 5L V5.3
3-6
Volumes Managed by Hitachi RapidXchange
OS
File Access Library and File Conversion Utility (FAL/FCU)
01-03-56/20 or later
File Access Library and File Conversion Utility (FAL/FCU)
01-04-64/21 or later
Table 3-3 HDLM-Related Programs When
Table 3-3 HDLM-Related Programs When Combining Cluster
OS
•
PowerHA 5.5
•
PowerHA 6.1
•
Oracle RAC 10g 10.1.0.5.0
If the HDLM device is specified for direct access:
ASM + raw devices
•
Oracle RAC 10g 10.2.0.2.0
If the HDLM device is specified for direct access:
ASM + raw devices
Creating an HDLM Environment
Hitachi Dynamic Link Manager User Guide (for AIX(R))
3-6. For details about Hitachi
Related Programs
3-6.
Configurations
Related Programs
#1
#1
, or raw devices
Table
#1