Kapl05001 To Kapl06000 - Hitachi XP P9500 User Manual

Message
ID
KAPL04045-
I
KAPL04046-
E

KAPL05001 to KAPL06000

Message ID
KAPL05003-I The HDLM driver (filter component) was
8-38
Message Text
HDLM SNMP TRAP was sent. Trap ID =
aa...aa, IP Address = bb...bb, Port
Number= cc...cc, Community = dd...dd,
Trap Data = ee...ee
An attempt to connect to the HDLM alert
driver has failed. RC = aa...aa. The HDLM
manager will now terminate.
Message Text
successfully attached to Disk (aa...aa),
Partition (bb...bb).
Messages
Hitachi Dynamic Link Manager User Guide (for AIX(R))
Explanation
Details
SNMP TRAP was sent.
aa...aa: Trap ID
bb...bb: Destination IP
address of the trap
cc...cc: Destination port
number of the trap
dd...dd: Community name
given to the trap
ee...ee: Transmission data
Action
None.
Details
An attempt to connect to
the HDLM alert driver
during HDLM manager
startup has failed. The
HDLM manager will now
terminate.
aa...aa: OS error code
(decimal number)
Action
See Installing HDLM on
page 3-16, and then
complete the installation.
If the same error continues
to occur even after the
procedure is performed,
execute the DLMgetras
utility for collecting HDLM
error information, and then
contact your HDLM vendor
or maintenance company if
there is a maintenance
contract for HDLM. For
details on the DLMgetras
utility, see DLMgetras
Utility for Collecting HDLM
Error Information on page
7-4.
Explanation
Details
The path corresponding to
Disk (aa...aa: Disk