HP Surestore Disk Array 12h - And FC60 Service Manual page 597

Note
Component/Status Disks
AM60: Good Component is installed and no error conditions are known.
STM: Optimal
AM60: Critical N/A
STM: Fault - 2
AM60: Non-critical N/A
STM: Fault - 3
AM60: Not Installed Component is not installed.
STM: Not Present
AM60: Unknown N/A
STM: Fault - 0
Not Available Component is installed without known errors, but has not been turned on
or set into operation; or the controller that owns reporting has failed.
Fans, Power
BCCs Supplies
Hardware has failed.
BCC A and B N/A
have different
firmware
versions.
N/A N/A
Sensors
Voltage/temperature
exceeds critical limit.
Voltage/temperature
exceeds warning limit.
Sensor has failed or
status is not available.
597