HP Surestore Disk Array 12h - And FC60 Service Manual page 402

0x220A Copyback Start: Logged when copy
task is started
0x220B Copyback Restart: Logged when
copy task is restarted
0x220C Disk or LUN Failed on Interrupted
Write: Logged when the specified
device or LUN is failed during
interrupted write processing.
SK/ASC/ASCQ = 0x06/0x3F/0x8E will
be reported for the device that is
failed. SK/ASC/ASCQ =
0x06/0x3F/0xE0 will be reported for
each LUN that is goes dead.
0x220E Media Scan (Scrub) Start: Logged
when a scrub operation is started for
the specified unit
0x220F Media Scan (Scrub) Complete:
Logged when a scrub operation is
completed for the specified unit.
0x2210 Restore Begin: Logged when cfg
manager begins a restore operation
on specified unit and device number.
0x2211 Restore End: Logged when cfg
manager successfully completes a
restore operation. If an error occurred
during the restore this entry may not
appear.
0x2212 Parity Scan Repair: Logged when
the configuration manager repairs the
parity of specified unit and device.
0x2213 LUN Initialized with Zeroes: Logged
when zeros are written to the
specified LUN.
402
Informational Notification
(0x0) (0x4)
Informational Notification
(0x0) (0x4)
Informational Notification
(0x0) (0x4)
Informational Notification
(0x0) (0x4)
Informational Notification
(0x0) (0x4)
Informational Notification
(0x0) (0x4)
Informational Notification
(0x0) (0x4)
Informational Notification
(0x0) (0x4)
Informational Notification
(0x0) (0x4)
Volume (0xD)
Volume (0xD)
Unknown
(0x0)
Unknown
(0x0)
Unknown
(0x0)
Controller
(0x8)
Controller
(0x8)
Controller
(0x8)
Drive (0x1)