HP Surestore Disk Array 12h - And FC60 Service Manual page 417

Event
Number Event Description
0x3000 Format LUN: Logged when the
controller processes a format
command. The LUN value indicates
the LUN that the controller is
formatting.
0x3001 Quiesce: Logged for the quiescence
command.
0x3002 Reassign Blocks: Logged for a
reassign blocks command that has
been issued from the host.
0x3003 Reserve LUN Command: Logged for
the reserve command.
0x3004 Release LUN Reservation: Logged
for the release command.
0x3005 Synchronize Cache: Logged when
controllers begins execution of
Synchronize Cache
0x3006 Safe Pass Through: These log
entries are made by the set pass
through and save pass through
command handlers respectively
before the pass through command is
sent to the drive. The following
passed through commands are not
logged: Test Unit Ready, Read
Capacity, Inquiry, Mode Sense. All
other commands are logged
regardless of their success or failure.
Priority Category
Informational Command
(0x0) (0x3)
Informational Command
(0x0) (0x3)
Informational Command
(0x0) (0x3)
Informational Command
(0x0) (0x3)
Informational Command
(0x0) (0x3)
Informational Command
(0x0) (0x3)
Informational Command
(0x0) (0x3)
Component
Volume (0xD)
Controller
(0x8)
Volume (0xD)
Volume (0xD)
Volume (0xD)
Controller
(0x8)
Drive (0x1)
417