HP Surestore Disk Array 12h - And FC60 Service Manual page 415

0x2806 Disk Enclosure Device State
Change: Logged when SSM has
detected a change in an enclosure
device, other than a drive status.
0x2808 Sub-Enclosure ID Not Unique:
Logged when the controller
determines that there are multiple
sub-enclosures with the same ID
value selected.
0x2809 Subsystem Line Transitioned to
Good State: Logged when a
subsystem line has transitioned to the
Good state.
0x280A Expected Subsystem Line Missing:
Logged when an expected subsystem
line is missing
0x280B Subsystem Line Failed: Logged
when a subsystem line has
transitioned to the Failed state.
0x280C Enclosure Transitioned to Good
State: Logged when an enclosure
has transitioned to the Good state.
0x280D Disk Enclosure Component Failed:
Logged when an enclosure has
transitioned to the Failed state.
0x280E Battery Low: Logged when the
battery is charge is low
0x280F Redundant Path Not Available to
Devices: Logged when a redundant
path is not available to devices
0x2810 Redundant Path to Devices
Restored: Logged when a redundant
path to devices is restored
Informational Notification
(0x0) (0x4)
Informational Notification
(0x0) (0x4)
Informational Notification
(0x0) (0x4)
Critical (0x1) Notification
(0x4)
Critical (0x1) Notification
(0x4)
Informational Notification
(0x0) (0x4)
Critical (0x1) Notification
(0x4)
Critical (0x1) Notification
(0x4)
Informational Notification
(0x0) (0x4)
Informational Notification
(0x0) (0x4)
ESM (0x7)
ESM (0x7)
Unknown
(0x0)
Unknown
(0x0)
Unknown
(0x0)
ESM (0x7)
ESM (0x7)
Battery (0x9)
ESM (0x7)
ESM (0x7)
415