HP Surestore Disk Array 12h - And FC60 Service Manual page 4

Service Manual Revision History
Change
Added Disk Module Behavior When Moving Disks
module behavior change introduced with firmware release HP03.
Added list of supported UPS models.
Change
Added Figure 87 to clarify operation of the write cache flush thresholds.
Added note regarding the impact of LUN binding on performance.
Added Allocating Space for Disk Array Logs
environment variable
Added amutil -rr option for setting disk status to REPLACED.
Added information on
Added information on correct slot for installing position of a single 256 MB
DIMM on the controller.
Added -force option to syswipe command for formatting array with LUNs in
place.
Updated firmware download procedures for HP08.
Added information for RAID 0 support on HP-UX.
Changed the required minimum number of disk modules per enclosure from 2
to 4 based on power supply requirements for the disk enclosure.
Added information on disabling disk write cache enable to improve data
integrity.
4
AM60_MAX_LOG_SIZE_MB.
Purging Controller Logs.
to describe the disk
section describing use of
Page
270
164
Page
267
264
340
336
344
673
331
346
60
85
325