HP Surestore Disk Array 12h - And FC60 Service Manual page 215

Module LED
Controller Power On
Enclosure
Power Fault
Fan Fault
Controller Fault
Fast Write Cache
Controller Controller Power
Controller Fault
Heartbeat
Status
Controller Fault - B
Battery
Full Charge - B
Fault - A
Full Charge - A
Controller Power 1
Power
Power 2
Assembly
Controller Fan Power
Fan
Fan Fault
Assembly
1. Both Full Charge A and Full Charge B LEDs are ON after batteries are fully charged.
The LEDs flash while charging is in progress, and remain on when charging is complete.
Any time power to the disk array controller enclosure is cycled, the BBU will recharge for
15 minutes. During this time, the Full Charge LEDs will flash.
Normal State
On (green)
Off
Off
Off
On (green) while data is in cache
On (green)
Off
Blink (green)
Green
There are 8 status LEDs. The number and pattern of
these LEDs depend on how your system is
configured.
Off
1
On (green)
Off
1
On (green)
On (green)
On (green)
On (green)
Off
215