HP Surestore Disk Array 12h - And FC60 Service Manual page 423

0x400C Alternate Controller Reset Hold:
Logged when the controller
successfully puts the alternate
controller in the reset/hold state.
0x400D Alternate Controller Reset Release:
Logged when the controller
successfully releases the alternate
controller from the reset/failed state.
0x400E Auto Volume Transfer: Logged
when an Auto Volume Transfer is
initiated.
0x400F Alternate controller has been reset:
Logged when the alternate controller
was reset. The controller number in
the event reflects the controller that
was held in reset.
0x4010 Controller Reset Through
Firmware: Logged when the
controller is going to reset itself
through the controller firmware. This
event is not logged when the
controller is reset because of
hardware errors (such as watchdog
timeout conditions). The controller
number reflects the controller number
of the board that was reset.
Critical (0x1) Notification
(0x4)
Informational Notification
(0x0) (0x4)
Informational Notification
(0x0) (0x4)
Informational Notification
(0x0) (0x4)
Informational Notification
(0x0) (0x4)
Controller
(0x8)
Controller
(0x8)
Controller
(0x8)
Controller
(0x8)
Controller
(0x8)
423