Backup Data And Note Configuration Settings - HP High-Performance Secure Hard Disk Setup Manual

Backup data and note configuration settings

Because only the HP Secure Hard Disk will be operational, backup any data that you need from the
standard (non-encrypted) hard disk(s). After installation, restore the data to the HP Secure Hard Disk.
In addition, you must reinstall any third-party applications, fonts (including specialized fonts), and
Postscript packages.
Configuration settings are lost and should be noted before installing the HP Secure Hard Disk.
Information you might need includes the following:
●
Address Book, Distribution Lists, and Authorized User List stored on an MFP
You can save the information using the HP embedded Web server by selecting Digital Sending
Tab and Import/Export. Follow the instructions for exporting. (You can import the data to the new
HP Secure Hard Disk.)
●
Stored, Private, and Quick Copy jobs stored on an MFP
Print and scan the jobs, and then re-send to the printer/MFP. To print a list of all stored jobs, select
Print List from the Job Storage application on the control panel.
●
Third-party applications
Verify that you have the source files so you can reinstall the applications on the printer/MFP.
●
Font and Postscript packages
Verify that you have the source files so you can reinstall the fonts and Postscript packages on the
printer/MFP.
●
HP embedded Web server configuration settings
Print or write down any configuration settings you need.
10 Chapter 2 Installation ENWW