External Fc Ports; Scsi Buses (E2400-160 Fc Interface Controller Only); Internal Fc Ports (E2400-Fc 2G Interface Controller Only); Lan-Free Backup And Restore - HP ESL E-Series User Manual

External FC ports

Two FC ports (for external connections) with LED indicators are found on the
interface controller: Port F0 and Port F1. See
of the FC ports.

SCSI buses (e2400-160 FC interface controller only)

Four SCSI buses with LED indicators are included in the FC interface controller.
See

Internal FC ports (e2400-FC 2G interface controller only)

The native FC interface controller has 6 native FC ports with LED indicators:
2ports (FC0 and FC1) connect to the SAN; 4 ports (TD0 through TD3) connect to
drives in the corresponding cluster. See

LAN-free backup and restore

The e2400-160 FC and the e2400-FC 2G interface controllers can enable
LAN-free backup/restore to allow the bulk of data traffic to be moved from the
LAN to the storage area network (SAN).
ESL E-Series Tape Library User's Guide
Green (ACT) - FC port activity
Green (LINK) - Valid FC link
Figure 8 for the location of the SCSI buses.
Green - SCSI bus activity on corresponding port
Green (ACT) - FC port activity
Green (LINK) - Valid FC link
Figure 8 and Figure
Figure 9 for the location of these ports.
Library Overview
9for the location
31