Alerts Window - HP XP20000/XP24000 User Manual

Figure 30 Port Status Window
Cluster-1 and Cluster-2 in the Port Status window indicate the clusters. The ports of Cluster-1 are
listed on the upper part, and the ports of Cluster-2 are listed on the lower part of the Port Status.
Each cluster has up to 16 PCBs and the name of each PCB is displayed on the header of the port
list. The icons show the port name, port LED status, and equipment information for the port. The
icons indicate the following information:
: This port is equipped and currently used. The cable is properly set. This port is available
for the operation.
: This port is equipped and available for the operation.
: This port is not equipped or not available.

Alerts Window

The Alerts window displays the internal status (according to the SIM information reported to the
host) of the connected storage system. The storage system generates a SIM whenever it detects an
error or service requirement.
The status history is listed in the Alerts list on the Alerts window. The icon displayed in the upper
right of the Remote Web Console main window indicates the error level of the disk controller status
or the disk array unit status. The icon indicates one or more severe errors.
To open the Alerts window, log in to the Remote Web Console, and then select Go, Device Status
and Alerts and Alerts from the menu bar of the Remote Web Console main window. Storage
partition administrators cannot display the Alerts window.
Alerts Window 67