Telnet Client - MikroTik RouterOS v2.9 Reference Manual

MikroTik RouterOS implements industry standard Telnet server. It uses port 23, which must not be
disabled on the router in order to use the feature.
You can enable/disable this service or allow the use of the service to certain IP addresses.
Example
[admin@MikroTik] ip service> print detail
Flags: X - disabled, I - invalid
0 name="telnet" port=23 address=0.0.0.0/0
1 name="ftp" port=21 address=0.0.0.0/0
2 name="www" port=80 address=0.0.0.0/0
3 name="hotspot" port=8088 address=0.0.0.0/0
4 name="ssh" port=65 address=0.0.0.0/0
5 X name="hotspot-ssl" port=443 address=0.0.0.0/0 certificate=none
[admin@MikroTik] ip service>

Telnet Client

Command name: /system telnet [IP address] [port]
Description
MikroTik RouterOS telnet client is used to connect to other hosts in the network via Telnet
protocol.
Example
An example of Telnet connection:
[admin@MikroTik] > system telnet 172.16.0.1
Trying 172.16.0.1...
Connected to 172.16.0.1.
Escape character is '^]'.
MikroTik v2.9
Login: admin
Password:
MMM MMM
MMMM MMMM
MMM MMMM MMM III
MMM MM MMM III
MMM MMM III
MMM MMM III
MikroTik RouterOS 2.9 (c) 1999-2004
Terminal unknown detected, using single line input mode
[admin@MikroTik] >
Copyright 1999-2007, MikroTik. All rights reserved. Mikrotik, RouterOS and RouterBOARD are trademarks of Mikrotikls SIA.
Other trademarks and registred trademarks mentioned herein are properties of their respective owners.
KKK
KKK
KKK KKK RRRRRR
KKKKK RRR RRR
KKK KKK RRRRRR
KKK KKK RRR RRR
TTTTTTTTTTT
TTTTTTTTTTT
OOOOOO TTT
OOO OOO TTT
OOO OOO TTT
OOOOOO TTT
http://www.mikrotik.com/
KKK
KKK
III KKK KKK
III KKKKK
III KKK KKK
III KKK KKK
Page 85 of 695