Snmp Setup; Snmp Communities - MikroTik RouterOS v2.9 Reference Manual

• No Set support
• No Trap support
Specifications
Packages required: system , ppp (optional)
License required: level1
Home menu level: /snmp
Standards and Technologies:
Hardware usage: Not significant
Related Documents
• Package Management
• IP Addresses and ARP
Additional Documents
• http://www.ietf.org/rfc/rfc1157.txt
• http://www.cisco.com/univercd/cc/td/doc/cisintwk/ito_doc/snmp.htm
• http://www.david-guerrero.com/papers/snmp/

SNMP Setup

Home menu level: /snmp
Description
This section shows you how to enable the SNMP agent on MikroTik RouterOS.
Property Description
enabled ( yes | no ) - whether the SNMP service is enabled
contact ( text ; default: "" ) - contact information for the NMS
location ( text ; default: "" ) - location information for the NMS
Example
To enable the service, specifying some info:
[admin@MikroTik] snmp> set contact="admin@riga-2" location="3rd floor" enabled="yes"
[admin@MikroTik] snmp> print
enabled: yes
contact: admin@riga-2
location: 3rd floor
[admin@MikroTik] snmp>

SNMP Communities

Copyright 1999-2007, MikroTik. All rights reserved. Mikrotik, RouterOS and RouterBOARD are trademarks of Mikrotikls SIA.
Other trademarks and registred trademarks mentioned herein are properties of their respective owners.
SNMP (RFC 1157)
Page 403 of 695