Sangoma Synchronous Cards; General Information; Synchronous Interface Configuration - MikroTik RouterOS v2.9 Reference Manual

Sangoma Synchronous Cards

Document revision 0.4 (Wed Oct 13 11:47:29 GMT 2004)
This document applies to MikroTik RouterOS V2.9
Table of Contents
Table of Contents

General Information

Summary
Specifications
Related Documents

Synchronous Interface Configuration

Description
Property Description
General Information
Summary
The MikroTik RouterOS supports the following Sangoma Technologies WAN adapters:
• Sangoma S5141 (dual-port) and S5142 (quad-port) PCI RS232/V.35/X.21 (4Mbit/s - primary
port and 512Kbit/s - secondary ones)
• Sangoma S5148 (single-port) and S5147 (dual-port) PCI E1/T1
Specifications
Packages required: synchronous
License required: level4
Home menu level: /interface sangoma
Standards and Technologies: X.21 , V.35 , T1/E1/G.703 , Frame Relay , PPP , Cisco-HDLC
Hardware usage: Not significant
Related Documents
• Package Management
• Device Driver List
• IP Addresses and ARP
• Log Management
Synchronous Interface Configuration
Home menu level: /interface sangoma
Description
Copyright 1999-2007, MikroTik. All rights reserved. Mikrotik, RouterOS and RouterBOARD are trademarks of Mikrotikls SIA.
Other trademarks and registred trademarks mentioned herein are properties of their respective owners.
Page 239 of 695