MikroTik RouterOS v2.9 Reference Manual page 208

[admin@MikroTik] interface farsync> /ip address add address=1.1.1.1/24 \
\... interface=farsync1
The essential part of the configuration of Cisco router is provided below:
interface Serial0
ip address 1.1.1.2 255.255.255.0
no ip route-cache
no ip mroute-cache
no fair-queue
!
ip classless
ip route 0.0.0.0 0.0.0.0 1.1.1.1
MikroTik router to MikroTik router using Frame Relay
Consider the following example:
The default value of the property clock-source must be changed to internal for one of the cards.
This card also requires the property frame-relay-dce set to yes. Both cards must have media-type
property set to X21 and the line-protocol set to frame-relay.
Now we need to add pvc interfaces:
[admin@hq] interface pvc> add dlci=42 interface=farsync1
[admin@hq] interface pvc> print
Flags: X - disabled, R - running
# NAME
0 X pvc1
[admin@hq] interface pvc>
Similar routine has to be done also on office router:
[admin@office] interface pvc> add dlci=42 interface=farsync1
[admin@office] interface pvc> print
Flags: X - disabled, R - running
# NAME
0 X pvc1
[admin@office] interface pvc>
Page 194 of 695
Copyright 1999-2007, MikroTik. All rights reserved. Mikrotik, RouterOS and RouterBOARD are trademarks of Mikrotikls SIA.
Other trademarks and registred trademarks mentioned herein are properties of their respective owners.
MTU DLCI INTERFACE
1500 42 farsync1
MTU DLCI INTERFACE
1500 42 farsync1