MikroTik RouterOS v2.9 Reference Manual page 273

Description
In the registration table you can see various information about currently connected clients. It is used
only for Access Points.
Property Description
ap ( read-only: no | yes ) - whether the connected device is an Access Point or not
bytes ( read-only: integer, integer ) - number of sent and received packet bytes
frame-bytes ( read-only: integer, integer ) - number of sent and received data bytes excluding
header information
frames ( read-only: integer, integer ) - number of sent and received 802.11 data frames excluding
retransmitted data frames
framing-current-size ( read-only: integer ) - current size of combined frames
framing-limit ( read-only: integer ) - maximal size of combined frames
framing-mode ( read-only: none | best-fit | exact-size ; default: none ) - the method how to
combine frames
hw-frame-bytes ( read-only: integer, integer ) - number of sent and received data bytes including
header information
hw-frames ( read-only: integer, integer ) - number of sent and received 802.11 data frames
including retransmitted data frames
interface ( read-only: name ) - interface that client is registered to
last-activity ( read-only: time ) - last interface data tx/rx activity
last-ip ( read-only: IP address ) - IP address found in the last IP packet received from the
registered client
mac-address ( read-only: MAC address ) - MAC address of the registered client
packets ( read-only: integer, integer ) - number of sent and received network layer packets
packing-size ( read-only: integer ) - maximum packet size in bytes
parent ( read-only: MAC address ) - parent access point's MAC address, if forwarded from another
access point
routeros-version ( read-only: name ) - RouterOS version of the registered client
rx-ccq ( read-only: integer : 0 ..100 ) - Client Connection Quality - a value in percent that shows
how effective the receive bandwidth is used regarding the theoretically maximum available
bandwidth. Mostly it depends from an amount of retransmited wireless frames.
rx-packed ( read-only: integer ) - number of received packets in form of received-packets/number
of packets, which were packed into a larger ones, using fast-frames
rx-rate ( read-only: integer ) - receive data rate
signal-strength ( read-only: integer ) - average strength of the client signal recevied by the AP
tx-ccq ( read-only: integer : 0 ..100 ) - Client Connection Quality - a value in percent that shows
how effective the transmit bandwidth is used regarding the theoretically maximum available
bandwidth. Mostly it depends from an amount of retransmited wireless frames.
tx-packed ( read-only: integer ) - number of sent packets in form of sent-packets/number of
Page 259 of 695
Copyright 1999-2007, MikroTik. All rights reserved. Mikrotik, RouterOS and RouterBOARD are trademarks of Mikrotikls SIA.
Other trademarks and registred trademarks mentioned herein are properties of their respective owners.