Hotspot User Profiles - MikroTik RouterOS v2.9 Reference Manual

• RADIUS client
• Software Package Management
• IP Addresses and ARP
Description

HotSpot User Profiles

Home menu level: /ip hotspot user profile
Description
HotSpot User profiles are used for common user settings. Profiles are like user groups, they are
grouping users with the same limits.
Property Description
address-pool ( name | none ; default: none ) - the IP poll name which the users will be given IP
addresses from. This works like dhcp-pool method in earlier versions of MikroTik RouterOS,
except that it does not use DHCP, but rather the embedded one-to-one NAT
• none - do not reassign IP addresses to the users of this profile
advertise ( yes | no ; default: no ) - whether to enable forced advertisement popups for this profile
advertise-interval ( multiple choice: time ; default: 30m,10m ) - set of intervals between showing
advertisement popups. After the list is done, the last value is used for all further advertisements
advertise-timeout ( time | immediately | never ; default: 1m ) - how long to wait for advertisement
to be shown, before blocking network access with walled-garden
advertise-url
http://www.mikrotik.com/,http://www.routerboard.com/ ) - list of URLs to show as
advertisement popups. The list is cyclic, so when the last item reached, next time the first is shown
idle-timeout ( time | none ; default: none ) - idle timeout (maximal period of inactivity) for
authorized clients. It is used to detect, that client is not using outer networks (e.g. Internet), i.e.,
there is NO TRAFFIC coming from that client and going through the router. Reaching the timeout,
user will be logged out, dropped of the host list, the address used by the user will be freed, and the
session time accounted will be decreased by this value
• none - do not timeout idle users
incoming-filter ( name ) - name of the firewall chain applied to incoming packets from the users of
this profile
incoming-packet-mark ( name ) - packet mark put on all the packets from every user of this
profile automatically
keepalive-timeout ( time | none ; default: 00:02:00 ) - keepalive timeout for authorized clients.
Used to detect, that the computer of the client is alive and reachable. If check will fail during this
period, user will be logged out, dropped of the host list, the address used by the user will be freed,
and the session time accounted will be decreased by this value
• none - do not timeout unreachable users
Copyright 1999-2007, MikroTik. All rights reserved. Mikrotik, RouterOS and RouterBOARD are trademarks of Mikrotikls SIA.
Other trademarks and registred trademarks mentioned herein are properties of their respective owners.
( multiple choice: text ; default:
Page 365 of 695