General Interface Settings; General Information; Interface Status - MikroTik RouterOS v2.9 Reference Manual

General Interface Settings

Document revision 1.1 (Fri Mar 05 08:08:52 GMT 2004)
This document applies to MikroTik RouterOS V2.9
Table of Contents
Table of Contents
Summary
Description

Interface Status

Property Description
Example
Traffic Monitoring
Description
Property Description
Notes
Example

General Information

Summary
MikroTik RouterOS supports a variety of Network Interface Cards as well as some virtual
interfaces (like Bonding, Bridge, VLAN etc.). Each of them has its own submenu, but there is also a
list of all interfaces where some common properties can be configured.
Description
The Manual describes general settings of MikroTik RouterOS interfaces.
Interface Status
Home menu level: /interface
Property Description
name ( text ) - the name of the interface
type ( read-only: arlan | bonding | bridge | cyclades | eoip | ethernet | farsync | ipip | isdn-client |
isdn-server | l2tp-client | l2tp-server | moxa-c101 | moxa-c502 | mtsync | pc | ppp-client | ppp-server |
pppoe-client | pppoe-server | pptp-client | pptp-server | pvc | radiolan | sbe | vlan | wavelan | wireless
| xpeed ) - interface type
mtu ( integer ) - maximum transmission unit for the interface (in bytes)
rx-rate ( integer ; default: 0 ) - maximum data rate for receiving data
• 0 - no limits
tx-rate ( integer ; default: 0 ) - maximum data rate for transmitting data
Copyright 1999-2007, MikroTik. All rights reserved. Mikrotik, RouterOS and RouterBOARD are trademarks of Mikrotikls SIA.
Other trademarks and registred trademarks mentioned herein are properties of their respective owners.
Page 201 of 695