Active Host List - MikroTik RouterOS v2.9 Reference Manual

Notes
This is an ordered list, so you can put more specific entries on the top of the list for them to override
the more common that appear lower.

Active Host List

Home menu level: /ip hotspot host
Description
This menu shows all active network hosts that are connected to the HotSpot gateway. This list
includes all one-to-one NAT translations
Property Description
address ( read-only: IP address ) - the original IP address of the client
authorized ( read-only: flag ) - whether the client is successfully authenticated by the HotSpot
system
blocked ( read-only: flag ) - true, if access is blocked within walled-garden because of expired
advertisement timeout
bridge-port ( read-only: name ) - the actual physical interface, which the host is connected to. This
is used when HotSpot service is put on a bridge interface to determine the host's actual port within
the bridge.
bypass-hotspot ( read-only: flag ) - whether the client does not need to be authorized by the
HotSpot system
bytes-in ( read-only: integer ) - how many bytes did the router receive from the client
bytes-out ( read-only: integer ) - how many bytes did the router send to the client
host-dead-time ( read-only: time ) - how long has the router not received any packets (including
ARP replies, keepalive replies and user traffic) from this host
idle-time ( read-only: time ) - the amount of time has the user been idle
idle-timeout ( read-only: time ) - the exact value of idle-timeout that applies to this user. This
property shows how long should the user stay idle for it to be logged off automatically
keepalive-timeout ( read-only: time ) - the exact value of keepalive-timeout that applies to this
user. This property shows how long should the user's computer stay out of reach for it to be logged
off automatically
mac-address ( read-only: MAC address ) - the actual MAC address of the user
packets-in ( read-only: integer ) - how many packets did the router receive from the client
packets-out ( read-only: integer ) - how many packets did the router send to the client
server ( read-only: name ) - name of the server, which the host is connected to
static ( read-only: flag ) - whether this translation has been taken from the static IP binding list
to-address ( read-only: IP address ) - what address is the original IP address of the host translated
to
Page 516 of 695
Copyright 1999-2007, MikroTik. All rights reserved. Mikrotik, RouterOS and RouterBOARD are trademarks of Mikrotikls SIA.
Other trademarks and registred trademarks mentioned herein are properties of their respective owners.