Torch (Realtime Traffic Monitor); General Information; The Torch Command - MikroTik RouterOS v2.9 Reference Manual

Torch (Realtime Traffic Monitor)

Document revision 1.8 (Fri Nov 05 12:25:04 GMT 2004)
This document applies to MikroTik RouterOS V2.9
Table of Contents
Table of Contents

General Information

Summary
Specifications
Related Documents
Description

The Torch Command

Property Description
Notes
Example
General Information
Summary
Realtime traffic monitor may be used to monitor the traffic flow through an interface.
Specifications
Packages required: system
License required: level1
Home menu level: /tool
Standards and Technologies: none
Hardware usage: Not significant
Related Documents
• Software Package Management
Description
Realtime Traffic Monitor called also torch is used for monitoring traffic that is going through an
interface. You can monitor traffic classified by protocol name, source address, destination address,
port. Torch shows the protocols you have chosen and mean transmitted and received data rate for
each of them.
The Torch Command
Command name: /tool torch
Property Description
Copyright 1999-2007, MikroTik. All rights reserved. Mikrotik, RouterOS and RouterBOARD are trademarks of Mikrotikls SIA.
Other trademarks and registred trademarks mentioned herein are properties of their respective owners.
Page 619 of 695