Lcd Troubleshooting - MikroTik RouterOS v2.9 Reference Manual

# DISPLAY-TIME
0 X 5s
1 X 5s
2 X 5s
3 X 5s
4 X 5s
5 X 5s
6 X 5s
7 X 5s
[admin@MikroTik] system lcd page> enable [find]
[admin@MikroTik] system lcd page> print
Flags: X - disabled
# DISPLAY-TIME
0 5s
1 5s
2 5s
3 5s
4 5s
5 5s
6 5s
7 5s
[admin@MikroTik] system lcd page>
To set "System date and time" page to be displayed for 10 seconds:
[admin@MikroTik] system lcd page> set 0 display-time=10s
[admin@MikroTik] system lcd page> print
Flags: X - disabled
# DISPLAY-TIME
0 10s
1 5s
2 5s
3 5s
4 5s
5 5s
6 5s
7 5s
[admin@MikroTik] system lcd page>

LCD Troubleshooting

Description
LCD doesn't work, cannot be enabled by the '/system lcd set enabled=yes' command.
Probably the selected serial port is used by PPP client or server, or by the serial console. Check the
availability and use of the ports by examining the output of the /port print command. Alternatively,
select another port for connecting the LCD, or free up the desired port by disabling the related
resource
LCD doesn't work, does not show any information.
Probably none of the information display items have been enabled. Use the /system lcd page set
command to enable the display.
Copyright 1999-2007, MikroTik. All rights reserved. Mikrotik, RouterOS and RouterBOARD are trademarks of Mikrotikls SIA.
Other trademarks and registred trademarks mentioned herein are properties of their respective owners.
DESCRIPTION
System date and time
System resources - cpu and memory load
System uptime
Aggregate traffic in packets/sec
Aggregate traffic in bits/sec
Software version and build info
ether1
prism1
DESCRIPTION
System date and time
System resources - cpu and memory load
System uptime
Aggregate traffic in packets/sec
Aggregate traffic in bits/sec
Software version and build info
ether1
prism1
DESCRIPTION
System date and time
System resources - cpu and memory load
System uptime
Aggregate traffic in packets/sec
Aggregate traffic in bits/sec
Software version and build info
ether1
prism1
Page 575 of 695