Reboot; Shutdown - MikroTik RouterOS v2.9 Reference Manual

0 00:13.0 Compaq
1 00:12.5 National Semi
2 00:12.4 National Semi
3 00:12.3 National Semi
4 00:12.2 National Semi
5 00:12.1 National Semi
6 00:12.0 National Semi
7 00:0e.0 Atheros Communications
8 00:0d.1 Texas Instruments
9 00:0d.0 Texas Instruments
10 00:0c.0 National Semi
11 00:0b.0 National Semi
12 00:00.0 Cyrix Corporation
[admin@MikroTik] system resource pci>

Reboot

Command name: /system reboot
Description
The system reboot is required when upgrading or installing new software packages. The packages
are installed during the system shutdown.
The reboot process sends termination signal to all running processes, unmounts the file systems,
and reboots the router.
Notes
Only users, which are members of groups with reboot privileges are permitted to reboot the router.
Reboot can be called from scripts, in which case it does not prompt for confirmation.
Example
[admin@MikroTik] > system reboot
Reboot, yes? [y/N]: y
system will reboot shortly
[admin@MikroTik] >

Shutdown

Command name: /system shutdown
Description
Before turning the power off for the router, the system should be brought to halt. The shutdown
process sends termination signal to all running processes, unmounts the file systems, and halts the
router.
For most systems, it is necessary to wait approximately 30 seconds for a safe power down.
Notes
Only users, which are members of groups with reboot privileges are permitted to shutdown the
Copyright 1999-2007, MikroTik. All rights reserved. Mikrotik, RouterOS and RouterBOARD are trademarks of Mikrotikls SIA.
Other trademarks and registred trademarks mentioned herein are properties of their respective owners.
ZFMicro Chipset USB (rev... 12
SC1100 XBus (rev: 0)
SC1100 Video (rev: 1)
SCx200 Audio (rev: 0)
SCx200 IDE (rev: 1)
SC1100 SMI (rev: 0)
SC1100 Bridge (rev: 0)
AR5212 (rev: 1)
PCI1250 PC card Cardbus ... 11
PCI1250 PC card Cardbus ... 11
DP83815 (MacPhyter) Ethe... 10
DP83815 (MacPhyter) Ethe... 9
PCI Master (rev: 0)
10
Page 597 of 695