Suggested Radius Servers; Supported Radius Attributes - MikroTik RouterOS v2.9 Reference Manual

cause a user session to be terminated immediately
Property Description
accept ( yes | no ; default: no ) - Whether to accept the unsolicited messages
port ( integer ; default: 1700 ) - The port number to listen for the requests on
Notes
RouterOS doesn't support POD (Packet of Disconnect) the other RADIUS access request packet
that performs a similar function as Disconnect Messages

Suggested RADIUS Servers

Description
MikroTik RouterOS RADIUS Client should work well with all RFC compliant servers. It has been
tested with:
• FreeRADIUS
• XTRadius (does not currently support MS-CHAP)
• Steel-Belted Radius

Supported RADIUS Attributes

Description
MikroTik RADIUS Dictionaries
Here you can download
RADIUS attributes. This dictionary is the minimal dictionary, which is enough to support all
features of MikroTik RouterOS. It is designed for FreeRADIUS, but may also be used with many
other UNIX RADIUS servers (eg. XTRadius).
Note that it may conflict with the default configuration files of RADIUS server, which have
references to the Attributes, absent in this dictionary. Please correct the configuration files, not the
dictionary, as no other Attributes are supported by MikroTik RouterOS.
There is also dictionary.mikrotik
vendor-specific Attributes.
Definitions
• PPPs - PPP, PPTP, PPPoE and ISDN
• default configuration - settings in default profile (for PPPs) or HotSpot server settings (for
HotSpot)
Page 384 of 695
Copyright 1999-2007, MikroTik. All rights reserved. Mikrotik, RouterOS and RouterBOARD are trademarks of Mikrotikls SIA.
Other trademarks and registred trademarks mentioned herein are properties of their respective owners.
MikroTik reference dictionary
that can be included in an existing dictionary to support MikroTik
, which incorporates all the needed