Proxy-Arp Feature - MikroTik RouterOS v2.9 Reference Manual

1 D 10.5.7.242
2 10.10.10.10
[admin@MikroTik] ip arp>
If static arp entries are used for network security on an interface, you should set arp to 'reply-only'
on that interface. Do it under the relevant /interface menu:
[admin@MikroTik] ip arp> /interface ethernet set ether2 arp=reply-only
[admin@MikroTik] ip arp> print
Flags: X - disabled, I - invalid, H - DHCP, D - dynamic
# ADDRESS
0 D 10.5.7.242
1 10.10.10.10
[admin@MikroTik] ip arp>

Proxy-ARP feature

Description
A router with properly configured proxy ARP feature acts like a transparent ARP proxy between
directly connected networks. Consider the following network diagram:
Copyright 1999-2007, MikroTik. All rights reserved. Mikrotik, RouterOS and RouterBOARD are trademarks of Mikrotikls SIA.
Other trademarks and registred trademarks mentioned herein are properties of their respective owners.
00:A0:24:9D:52:A4 ether1
06:21:00:56:00:12 ether2
MAC-ADDRESS
00:A0:24:9D:52:A4 ether1
06:21:00:56:00:12 ether2
INTERFACE
Page 103 of 695