Ppp Server Setup - MikroTik RouterOS v2.9 Reference Manual

Example
[admin@MikroTik] > /port print
# NAME
0 serial0
1 databooster1
2 databooster2
3 databooster3
4 databooster4
5 databooster5
6 databooster6
7 databooster7
8 databooster8
9 cycladesA1
10 cycladesA2
11 cycladesA3
12 cycladesA4
13 cycladesA5
14 cycladesA6
15 cycladesA7
16 cycladesA8
[admin@MikroTik] > set 9 baud-rate=38400
[admin@MikroTik] >

PPP Server Setup

Home menu level: /interface ppp-server
Description
PPP server provides a remode connection service for users. When dialing in, the users can be
authenticated locally using the local user database in the /user menu, or at the RADIUS server
specified in the /ip ppp settings.
Property Description
port ( name ; default: (unknown) ) - serial port
authentication ( multiple choice: mschap2, mschap1, chap, pap ; default: mschap2, mschap1,
chap, pap ) - authentication protocol
profile ( name ; default: default ) - profile name used for the link
mtu ( integer ; default: 1500 ) - Maximum Transmission Unit. Maximum packet size to be
transmitted
mru ( integer ; default: 1500 ) - Maximum Receive Unit
null-modem ( no | yes ; default: no ) - enable/disable null-modem mode (when enabled, no modem
initialization strings are sent)
modem-init ( text ; default: "" ) - modem initialization string. You may use "s11=40" to improve
dialing speed
ring-count ( integer ; default: 1 ) - number of rings to wait before answering phone
name ( name ; default: ppp-inN ) - interface name for reference
Example
You can add a PPP server using the add command:
Page 230 of 695
Copyright 1999-2007, MikroTik. All rights reserved. Mikrotik, RouterOS and RouterBOARD are trademarks of Mikrotikls SIA.
Other trademarks and registred trademarks mentioned herein are properties of their respective owners.
USED-BY
Serial Console
BAUD-RATE
9600
9600
9600
9600
9600
9600
9600
9600
9600
9600
9600
9600
9600
9600
9600
9600
9600