Wiring And Attaching The Terminal Module - VXI VT1422A User Manual

Wiring and Attaching the Terminal Module

1
Remove Clear Cover.
3
Make Connections (Spring Clamp)
Depress terminal lever(s). Insert
wire(s) into terminal(s). Release levers.
Use wire size 20-26 AWG
5 mm
0.2"
Special tool P/N 8710-2127
(Shipped with Terminal Module)
Figure 2-13. Opening and Wiring the VT1422A's Terminal Module
50 Field Wiring
Figures 2-13 and 2-14 show how to open, wire and attach the terminal module to a
VT1422A.
A. Release screws.
B. Press tab forward
and release.
Tab
2
Remove and Retain Wiring Exit Panel
(Screw Type)
Insert wire into terminal.
Tighten screw.
4
Route Wiring
Tighten wraps to
secure wires.
Remove 1 of the 3
wire exit panels.
Use wire
size 16-26
AWG
5 mm
0.2"
VW1 Flammability
Rating
Chapter 2