DIAGnostic:IEEE?
Comments
DIAGnostic:INTerrupt[:LINe]
Parameters
Comments
Usage
DIAGnostic:INTerrupt[:LINe]?
Comments
Usage
Chapter 7
DIAGnostic:IEEE?
returns the currently set IEEE mode.
•
The data type is int16.
•
Related Commands: DIAG:IEEE
•
*RST Condition: DIAG:IEEE 1
•
Send with VXIplug&play Function: hpe1422_cmdInt16_Q(...)
DIAGnostic:INTerrupt[:LINe] <intr_line>
module will use.
Parameter
Parameter
Name
Type
intr_line
numeric (int16)
•
Related Commands: DIAG:INT:LINE?
•
Power-on and *RST Condition: DIAG:INT:LINE 1
•
Send with VXIplug&play Function: hpe1422_cmd(...)
DIAG:INT:LINE 5
DIAGnostic:INTerrupt[:LINe]?
set to use.
•
Returned Value: Numeric 0 through 7. The data type is int16.
•
Related Commands: DIAG:INT:LINE
•
Send with VXIplug&play Function: hpe1422_cmdInt16_Q(...)
DIAG:INT?
sets the VXIbus interrupt line the
Range of
Values
0 through 7
Module will interrupt on interrupt line 5
returns the VXIbus interrupt line that the module is
Enter statement will return 0 through 7
VT1422A Command Reference
DIAGnostic
Default
Units
none
283