Status:operation:enable; Status:operation[:Event] - VXI VT1422A User Manual

STATus:OPERation:ENABle?

Comments
Usage

STATus:OPERation[:EVENt]?

Comments
Usage
Chapter 7

STATus:OPERation:ENABle?

register.
•
Returned Value: Decimal weighted sum of all set bits. The data type is uint16.
•
Related Commands: *STB?, SPOLL, STAT:OPER:COND?,
STAT:OPER:EVENT?, STAT:OPER:ENABLE
•
*RST Condition: No change
•
Send with VXIplug&play Function: hpe1422_cmdInt16_Q(...)
STAT:OPER:ENABLE?

STATus:OPERation[:EVENt]?

the Event register.
•
When using the Operation Event register to cause SRQ interrupts,
STAT:OPER:EVENT? must be executed after an SRQ to re-enable future
interrupts.
•
Returned Value: Decimal weighted sum of all set bits. The data type is uint16.
•
Related Commands: *STB?, SPOLL, STAT:OPER:COND?,
STAT:OPER:ENABLE, STAT:OPER:ENABLE?
•
Cleared By: *CLS, power-on and by reading the register.
•
*RST Condition: No change
•
Use VXIplug&play function: hpe1422_operEvent_Q(...)
STAT:OPER:EVENT?
STAT:OPER?
returns the value of bits set in the Operation Enable
Enter statement returns current value of
bits set in the Operation Enable register
returns the decimal weighted value of the bits set in
Enter statement will return the value of
bits set in the Operation Event register
Same as above
VT1422A Command Reference
STATus
383