Usage
SOURce:FM:STATe?
Parameters
Comments
SOURce:FUNCtion[:SHAPe]:CONDition
Parameters
Comments
Chapter 7
•
*RST Condition: SOUR:FM:STATE OFF, SOUR:PULM:STATE OFF,
SENS:FUNC:COND, and INP:POL for all digital SCP channels.
•
Related Commands: SOUR:PULM[:STATe], SOUR:PULS:POLarity,
SOUR:PULS:PERiod, SOUR:FUNC[:SHAPe]:SQUare
•
Send with VXIplug&play Function: hpe1422_cmd(...)
The variable frequency control for this channel is provided by the algorithm language.
When the algorithm executes an assignment statement to this channel, the value
assigned will be the frequency setting. For example:
O143 = 2000 /* set channel 43 to 2 kHz */
SOURce:FM:STATe? (@<channel>)
for a PULSe channel.
Parameter
Parameter
Name
Type
channel
string
•
The <channel> parameter must specify a single channel.
•
If the channel specified is not on a Frequency/Totalize SCP, an error will
be generated.
•
Returned Value: returns 1 (ON) or 0 (OFF). The type is uint16.
•
Send with VXIplug&play Function: hpe1422_cmdInt16_Q(...)
SOURce:FUNCtion[:SHAPe]:CONDition (@<ch_list>)
to output digital patterns to bits in <ch_list>.
Parameter
Parameter
Name
Type
ch_list
string
•
The VT1533A SCP sources 8 digital bits on the channel specified by this
command. The VT1534A SCP can source 1 digital bit on each of the channels
specified by this command.
•
Send with VXIplug&play Function: hpe1422_cmd(...)
returns the frequency modulated mode state
Range of
Values
100 - 163
sets the SOURce function
Range of
Values
100 - 163
VT1422A Command Reference
SOURce
Default
Units
none
Default
Units
none
373