Output:current[:State]; Output:polarity; Output:current[:State]? (@<Channel>); Output:polarity <Select>,(@<Ch_List>) - VXI VT1422A User Manual

OUTPut:CURRent[:STATe]?

Parameters
Comments
Usage

OUTPut:POLarity

Parameters
Comments
Usage
Chapter 7
OUTPut:CURRent[:STATe]? (@<channel>)
SCP channel specified by <channel>. If the channel is not on a VT1505A Current
Source SCP, the query will return zero.
Parameter Parameter
Name Type
channel channel list (string)
•
The <channel> parameter must specify a single channel only.
•
Returned Value: returns 1 for enabled, 0 for disabled. data type is uint16.
•
Related Commands: OUTP:CURR:STATE, OUTP:CURR:AMPL
•
Send with VXIplug&play Function: hpe1422_cmdInt16_Q(...)
OUTP:CURR? (@108)
execute enter statement here
OUTPut:POLarity <select>,(@<ch_list>)
channels in <ch_list>.
Parameter Parameter
Name Type
select discrete (string)
ch_list string
•
If the channels specified do not support this function, an error will be generated.
•
Related Commands: INPut:POLarity, OUTPut:POLarity?
•
*RST Condition: OUTP:POL NORM for all digital channels
•
Send with VXIplug&play Function: hpe1422_cmd(...)
OUTP:POL INV,(@144)
returns the state of the Current Source
Range of
Values
100 - 163
query for state of Current SCP channel 8
enter query value, either 1 or 0
sets the polarity on digital output
Range of
Values
NORMal | INVerted
100 - 163
invert output logic sense on channel 44
VT1422A Command Reference
OUTPut
Default
Units
none
Default
Units
none
none
315