MEMory:VME:ADDRess
Parameters
Comments
Usage
MEMory:VME:ADDRess?
Comments
Usage
Chapter 7
MEMory:VME:ADDRess <A24_address>
memory card to be used as additional reading storage.
Parameter
Parameter
Name
Type
A24_address
numeric
•
This command is only available in systems using an Agilent/HP E1405B/06A
command module.
•
The default (if MEM:VME:ADDR not executed) is 240000
•
The <A24_address> parameter may be specified in decimal, hex (#H), octal
(#Q), or binary (#B).
•
Related Commands: MEMory subsystem, FORMat, and FETCH?
•
*RST Condition: VME memory address starts at 200000
Agilent/HP E1405B/06A command module, the first VT1422A occupies
200000
- 23FFFF
16
MEM:VME:ADDR #H400000
MEMory:VME:ADDRess?
used for reading storage.
•
Returned Value: numeric.
•
This command is only available in systems using an Agilent/HP E1405B/06A
command module.
•
Related Commands: MEMory subsystem, FORMat, and FETCH?
MEM:VME:ADDR?
sets the A24 address of the VME
valid A24 address
.
16
Set the address for the VME memory card
to be used as reading storage
returns the address specified for the VME memory card
Returns the address of the VME
memory card.
VT1422A Command Reference
MEMory
Range of
Values
.
16
. When using an
16
Default
Units
none
309