[Sense] - VXI VT1422A User Manual

[SENSe]

[SENSe]
Subsystem Syntax
330 VT1422A Command Reference
The SENSe subsystem controls conversion of the sensed electrical signal to a value
in Engineering Units (EU) like volts, ohms, and temperature. Sense commands allow
one to configure and extract data from the A/D-EU conversion portion of the
instrument (see "INPut" subsystem on page 297 for input signal conditioning.
[SENSe:]
DATA
:CVTable? (@<element_list>)
:RESet
:FIFO
[:ALL]?
:COUNt?
:HALF?
:HALF?
:MODE BLOCk | OVERwrite
:MODE?
:PART? <n_values>
:RESet
FREQuency:APERture <gate time>,<ch_list>
FREQuency:APERture? <channel>
FUNCtion
:CONDition (@<ch_list>)
:CUSTom [<range>,](@<ch_list>)
:HVOLtage [<range>,](@<ch_list>)
:REFerence [<range>,](@<ch_list>)
:TC <type>,[<range>,](@<ch_list>)
:FREQuency (@<ch_list>)
:HVOLtage (@<ch_list>)
:RESistance <excite_current>,[<range>,](@<ch_list>)
:STRain
:FBENding [<range>,](@<ch_list>)
:POST [<range>,](@<exc_ch>),(@<ch_list>)
:FBPoisson [<range>,](@<ch_list>)
:POST [<range>,](@<exc_ch>),(@<ch_list>)
:FPOisson [<range>,](@<ch_list>)
:POST [<range>,](@<exc_ch>),(@<ch_list>)
:HBENding [<range>,](@<ch_list>)
:POST [<range>,](@<exc_ch>),(@<ch_list>)
:HPOisson [<range>,](@<ch_list>)
:POST [<range>,](@<exc_ch>),(@<ch_list>)
[:QUARter] [<range>,](@<ch_list>)
:POST [<range>,](@<exc_ch>),(@<ch_list>)
:Q120 [<range>,](@<ch_list>)
:POST [<range>,](@<exc_ch>),(@<ch_list>)
:Q350 [<range>,](@<ch_list>)
:POST [<range>,](@<exc_ch>),(@<ch_list>)
:USER [<range>,](@<ch_list>)
:POST [<range>,](@<exc_ch>),(@<ch_list>)
Chapter 7