System; System:ctype; System:ctype:remote; System:ctype? (@<Channel>) - VXI VT1422A User Manual

SYSTem

Subsystem Syntax

SYSTem:CTYPe?

Parameters
Comments
Usage

SYSTem:CTYPe:REMote?

Chapter 7
The SYSTem subsystem is used to query for error messages, types of Signal
Conditioning Plug-ons (SCPs) and the SCPI version currently implemented.
SYSTem
:CTYPe? (@<channel>)
:CTYPe:REMote? <@<channel>)
:ERRor?
:VERSion?
SYSTem:CTYPe? (@<channel>)
Conditioning Plug-On installed at the specified channel.
Parameter Parameter
Name Type
channel channel list (string)
•
The <channel> parameter must specify a single channel only.
•
Returned Value: An example of the response string format is:
HEWLETT-PACKARD,E1422A Option <option number and description>
SCP,0,0
The data type is string. For specific response string, refer to the appropriate SCP
manual. If <channel> specifies a position where no SCP is installed, the module
returns the response string:
0,No SCP at this Address,0,0
•
Send with VXIplug&play Function: hpe1422_cmdString_Q(...)
SYST:CTYPE? (@100)
SYSTem:CTYPe:REMote? (@<channel>)
Strain Conditioning Unit (VT1529A or VT1529B) installed at the specified channel.
This command is available with VXIplug&play driver revision A.01.09 or later
(revision A.01.06 or later of hpe1422_32.dll).
returns the identification of the Signal
Range of
Values
100 - 163
return SCP type installed at channel 0
returns the identification of the Remote
VT1422A Command Reference
SYSTem
Default
Units
none
391