Status:questionable:ptransition; Status:questionable:ptransition <Transition_Mask - VXI VT1422A User Manual

STATus

STATus:QUEStionable:PTRansition

Parameters
Comments
Usage

STATus:QUEStionable:PTRansition?

Comments
Usage
390 VT1422A Command Reference
STATus:QUEStionable:PTRansition <transition_mask>
Transition Filter (PTF) register. When a bit in the PTF register is set to one, the
corresponding bit in the Condition register must change from a zero to a one in order
to set the corresponding bit in the Event register. When a bit in the PTF register is
zero, a positive transition of the Condition register bit will not change the Event
register bit.
Parameter Parameter
Name Type
transition_mask numeric (uint16)
•
<transition_mask> may be sent as decimal, hex (#H), octal (#Q), or binary (#B).
•
If both the STAT:QUES:PTR and STAT:QUES:NTR registers have a
corresponding bit set to one, any transition, positive or negative, will set
the corresponding bit in the Event register.
•
If neither the STAT:QUES:PTR or STAT:QUES:NTR registers have a
corresponding bit set to one, transitions from the Condition register will
have no effect on the Event register.
•
Related Commands: STAT:QUES:PTR?, STAT:QUES:NTR
•
Set to all ones by: STAT:PRESet and power-on.
•
*RST Condition: No change
•
Send with VXIplug&play Function: hpe1422_cmd(...)
STAT:QUES:PTR 1024

STATus:QUEStionable:PTRansition?

Transition Filter (PTF) register.
•
Returned Value: Decimal weighted sum of all set bits. The data type is uint16.
•
Related Commands: STAT:QUES:PTR
•
*RST Condition: No change
•
Send with VXIplug&play Function: hpe1422_cmdInt16_Q(...)
STAT:OPER:PTR?
sets bits in the Positive
Range of
Values
0 - 32767
When "FIFO Overflowed" bit goes true,
set bit 10 in Status Operation Event
register.
returns the value of bits set in the Positive
Enter statement returns current value of
bits set in the PTF register
Default
Units
none
Chapter 7