Output:ttltrg<N>[:State]; Output:ttltrg<N>:State <Ttltrg_Cntrl - VXI VT1422A User Manual

OUTPut
OUTPut:TTLTrg<n>[:STATe]
Parameters
Comments
Usage
OUTPut:TTLTrg<n>[:STATe]?
Comments
Usage
320 VT1422A Command Reference
OUTPut:TTLTrg<n>:STATe <ttltrg_cntrl>
is enabled to source a trigger signal when the module is triggered. TTLTrg<n> can
specify line 0 through 7. For example, ...:TTLTRG4 or TTLT4 for VXIbus TTLTRG
line 4.
Parameter Parameter
Name Type
ttltrg_cntrl boolean (uint16)
•
Only one VXIbus TTLTRG line can be enabled simultaneously.
•
When Accepted: Not while INITiated
•
Related Commands: ABORT, INIT..., TRIG...
•
*RST Condition: OUTPut:TTLTrg<0 through 7> OFF
•
Send with VXIplug&play Function: hpe1422_cmd(...)
OUTP:TTLT2 ON
OUTPUT:TTLTRG7:STATE ON
OUTPut:TTLTrg<n>[:STATe]?
•
Returned Value: Returns 1 or 0. The data type is int16.
•
Related Commands: OUTP:TTLT<n>
•
Send with VXIplug&play Function: hpe1422_cmdInt16_Q(...)
OUTP:TTLT2?
OUTPUT:TTLTRG7:STATE?
specifies which VXIbus TTLTRG line
Range of
Values
1 | 0 | ON | OFF
Enable TTLTRG2 line to source a trigger
Enable TTLTRG7 line to source a trigger
returns the current state for TTLTRG line <n>.
See if TTLTRG2 line is enabled
(returns 1 or 0)
See if TTLTRG7 line is enabled
Default
Units
none
Chapter 7