Diagnostic:otdetect[:State]; Diagnostic:query:scpread; Diagnostic:otdetect[:State]? (@<Channel>); Diagnostic:query:scpread? <Reg_Addr - VXI VT1422A User Manual

DIAGnostic:OTDetect[:STATe]?

Parameters
Comments
Usage

DIAGnostic:QUERy:SCPREAD?

Parameters
Comments
Usage
Chapter 7
DIAGnostic:OTDetect[:STATe]? (@<channel>)
"Open Transducer Detection" for the SCP containing the specified <channel>.
Parameter Parameter
Name Type
channel channel list (string)
•
The <channel> parameter must specify a single channel only.
•
Returned Value: Returns 1 (enabled) or 0 (disabled). The data type is int16.
•
Related Commands: DIAG:OTDETECT:STATE ON | OFF
•
Send with VXIplug&play Function: hpe1422_cmd(...)
DIAG:OTD:STATE? (@108)
DIAGnostic:QUERy:SCPREAD? <reg_addr>
Conditioning Plug-on register.
Parameter Parameter
Name Type
reg_addr numeric (int32)
•
NOTE: This command may not be used while instrument is INITed.
•
Returned Value: returns numeric register value. data type is int32.
•
Send with VXIplug&play Function: hpe1422_cmdInt32_Q(...)
DIAG:QUERY:SCPREAD? 258
enter statement here
returns the current state of
Range of
Values
100 - 163
enter statement returns either a 1 or a 0
returns data word from a Signal
Range of
Values
0-65,535
read SCP #4 config/status register
return SCP ID value
VT1422A Command Reference
DIAGnostic
Default
Units
none
Default
Units
none
285