[Sense:]Reference:thermistor:resistance:post; [Sense:]Strain:bridge[:Type]; [Sense:]Reference:thermistor:resistance:post? (@<Thr_Ch>); [Sense:]Strain:bridge[:Type] <Select>,(@<Ch_List>) - VXI VT1422A User Manual

[SENSe]

[SENSe:]REFerence:THERmistor:RESistance:POST?

Parameters
Comments
Usage

[SENSe:]STRain:BRIDge[:TYPE]

Parameters
Comments
362 VT1422A Command Reference
[SENSe:]REFerence:THERmistor:RESistance:POST? (@<thr_ch>)
programmed sum of the resistor values in the thermistor divider circuit.
This command is valid only on the VT1529B and is available with VXIplug&play
driver revision A.01.09 or later (revision A.01.06 or later of hpe1422_32.dll).
Parameter Parameter
Name Type
resistance numeric (float32)
thr_ch channel list (string)
•
The <thr_ch> parameter must be a single channel only.
•
When Accepted: Not while INITiated
•
Related Commands: SENS:REF:THER:RES:POST
•
*RST Condition: SENS:REF:THER:RES:POST 400000
•
Send with VXIplug&play Function: hpe1422_cmd(...)
SENSE:REF:THER:RES:POST 397000,(@10001)
[SENSe:]STRain:BRIDge[:TYPE] <select>,(@<ch_list>)
bridge configuration switches for channels specified by <ch_list>.
Parameter Parameter
Name Type
select discrete (string)
ch_list channel list (string)
•
For a description of the effects of <select> see "VT1529A/B Bridge
Configurations" on page 70.
•
Related Commands: SENSE:FUNC:...
•
*RST Condition: SENS:STR:BRIDG[:TYPE] FBEN for all VT1529A/B
channels.
Range of
Values
1800 to 520,000
10000 - 15731
divider circuit for thermistor on channel
10001 has 397 kΩ total resistance
sets the VT1529A/B's
Range of
Values
FBENding | HBENding | Q120 | Q350 |
USER
10000 - 15731
returns the
Default
Units
ohms
none
Default
Units
none
none
Chapter 7